Skip to main content

County’s Contractor Will Stripe Roads at Night

Nighttime striping starts August 1. Motorists cautioned to avoid wet paint.
Media release

For Immediate Release: Friday, July 13, 2012

Nighttime striping starts August 12
UPDATED: 08/20/2012
Sponsored by: Department of Land Use and Transportation, Operations and Maintenance Division

Work under the nighttime road striping contract has been completed for this year. Washington County's contractor wrapped up work on Monday morning, August 20.


Original release: July 13, 2012

Washington County’s contractor, Apply-A-Line Inc., will work nights repainting the stripes on certain arterial roads. Night striping is tentatively scheduled to start August 1 and continue through the end of the month. Striping at night when there is less traffic has several advantages including reducing delays for motorists on heavily traveled roadways.

Roads Scheduled for Night Striping

  • 185th Avenue from TV Hwy to north of Springville
  • Barnes Road from Leahy Road to Baltic Avenue
  • Barnes Road from 117th Avenue to Cornell Road
  • Cornell Road from Multnomah County line to Main Street (Hillsboro)
  • Farmington Road from Murray Boulevard to 170th Avenue
  • Farmington Road from 198th Avenue to west of 209th
  • Murray Boulevard from Terman Road to Hwy 26
  • Scholls Ferry Road from Raleighwood Lane to east of Murray
  • Tualatin-Sherwood Road from Teton Avenue to Hwy 99

County crews usually repaint the stripes on rural and lower traffic volume urban roads throughout the summer. County striping crews will operate during daytime hours, weather permitting. Daytime striping work begins at 8:30 a.m. and ends by 4:30 p.m.

Motorists should use caution when they encounter a road striping operation. Do not drive across the stripes while the paint is still wet. The paint used to stripe roads is a water-borne, non-toxic paint containing reflective glass beads. If you accidentally get road paint on your vehicle, you can remove it if you wash the area with soap and water right away before the paint sets up.

Related: ODOT’s advice for removing striping paint from vehicles

Motorists approaching a striping operation from behind will have plenty of warning. First they will see a vehicle carrying an electronic message board displaying alternating messages such as “Wet Paint” and “Do Not Pass.”

Next will be a second shadow vehicle with flashing lights and a sign warning “Road Painting Ahead.” Finally flashing lights and a “Caution – Wet Paint” sign will identify the striper truck, which sprays the paint stripes onto the road. Additional warning signs may be used to further inform motorists of the striping operation. Please obey the signed instructions and drive with care when encountering these situations.

Washington County’s Department of Land Use and Transportation maintains almost a thousand lane miles of road striping. Because traffic wears the paint away, the stripes on heavily traveled roadways are repainted each year. Road striping must be done when the road surface is dry and the weather is relatively warm.

Related: ODOT video about road striping

For more information about the county’s road striping program, please contact Keith Lewis, Operations Superintendent, at (503) 846-7685.

For current road work information, visit Washington County Roads at www.wc-roads.com or call 503-846-ROAD (846-7623).

Washington County is committed to planning, building and maintaining the best transportation system, ensuring the safety of all roadway users, and to operating the county roadway system in a cost-effective and environmentally responsible manner.

Media Contact:

Stephen Roberts, Communications Coordinator
503-846-4963
[email protected]